Jump to content
IndiaDivine.org

HOW TO MAKE A TASER SHIELD

Rate this topic


Guest guest

Recommended Posts

HOW TO MAKE A TASER SHIELDBy John Dinardo

http://disc.yourwebapps.com/discussion.cgi?disc=149495;article=115628;title=APFNAs one who has spent four decades in electrical engineering and inelectronic circuit design and troubleshooting, I can tell you that,in order for the TASER to electrify its victim, there must be found apath by which electrical currrent can travel out of one probe andinto the other probe, so as to complete an electric current circuitFROM the gun, and then back TO the gun.The two TASER probes use the victim's body as a bridge to completethis electric current circuit. Now, if you can give the two probes aneasier bridge to cross, other than the bridge of your body, you willbe bypassing, or short-circuiting, the electric current away fromyour body, through the easier bridge, which would be any electrically-conductive material (e.g. aluminum foil). Another way to defeat theTASER is to provide *NO* bridge for electrical current to travel fromone probe to the other probe. You might provide *NO* bridge bywearing a material that is both physically resistant to the skin-probing action of the TASER probes, and is also electricallyresistant to the flow of electrons, like an OPEN bridge, preventingthe electrons from flowing out of one TASER probe tip and into theother TASER probe tip.There are many materials which possess both of these necessaryphysical and electrical properties. Some materials which come to mindare certain rugged plastic fabrics, rubberized fabrics, etc. In thecase of providing an EASY short-circuiting bridge, one might look forfabrics that are impregnated with metallic substances. more

 

 

 

 

Joe Spenner

anti taser

Wed Dec 26, 2007 17:10

http://disc.yourwebapps.com/discussion.cgi?disc=149495;article=116126;title=APFN

APFN:For documentation about abuse of a young mother and her child by Bush & Cheney, get a copy of one of the most mercyless abuse they suffered from stun guns. Be forewarned, it is not for the weak stomach types! The documentary it titled: "TRANCE FORMATION OF AMERICA, by Cathy O'Brien with Mark Phillips." (Available from internet. Start with: "CHAPTER 28, 'FREE TRADE OF DRUGS AND SLAVES AT THE JUAREZ BORDER." (In last sentence of first paragraph: "As soon as my eyes met his, I was knocked to the ground by a familiar blue-white blast (high-voltge) like the one I had recently experienced in D.C."(On page 205)."My world spun black. Someone had hit me with a powerfull stun gun and I was down." It is time to blow a steamboat whistle about such cowardly abuse! IT IS TIME TO BLOW A STEAMBOAT WHISTLE ABOUT COWARDLY TORTURE BY BUSH & CHENEY AND THEIR GANG OF CROOKS! FEARLESSLY, WITH DEPENDENCE ON GOD'S WISH FOR RESCUE OF INNOCENT, TORTURED PEOPLE! JOE SPENNER!

 

Link to comment
Share on other sites

Hmmm.

Thanks for the info on this as a co-worker of mine was assaulted at one time, not once, not twice but three times by the taser police.

As the story goes (what was told to me): my friend got a little rowdy while drinking and the police were called. My friend pulled the first taser prongs out, the second cop fired and took my friend down to the ground but because my friend was still moving, they then shot him a third time. My friend has the scars to prove this.

They say that police get special training and actually get a taste of the shock themselves ---- I don't believe that, but what do I know? Only what they say.

Kenneth T

 

-

Misty

Health and Healing ; Armageddon or New Age

Wednesday, December 26, 2007 3:04 AM

HOW TO MAKE A TASER SHIELD

 

 

HOW TO MAKE A TASER SHIELDBy John Dinardo

http://disc.yourwebapps.com/discussion.cgi?disc=149495;article=115628;title=APFNAs one who has spent four decades in electrical engineering and inelectronic circuit design and troubleshooting, I can tell you that,in order for the TASER to electrify its victim, there must be found apath by which electrical currrent can travel out of one probe andinto the other probe, so as to complete an electric current circuitFROM the gun, and then back TO the gun.The two TASER probes use the victim's body as a bridge to completethis electric current circuit. Now, if you can give the two probes aneasier bridge to cross, other than the bridge of your body, you willbe bypassing, or short-circuiting, the electric current away fromyour body, through the easier bridge, which would be any electrically-conductive material (e.g. aluminum foil). Another way to defeat theTASER is to provide *NO* bridge for electrical current to travel fromone probe to the other probe. You might provide *NO* bridge bywearing a material that is both physically resistant to the skin-probing action of the TASER probes, and is also electricallyresistant to the flow of electrons, like an OPEN bridge, preventingthe electrons from flowing out of one TASER probe tip and into theother TASER probe tip.There are many materials which possess both of these necessaryphysical and electrical properties. Some materials which come to mindare certain rugged plastic fabrics, rubberized fabrics, etc. In thecase of providing an EASY short-circuiting bridge, one might look forfabrics that are impregnated with metallic substances. more

 

 

 

 

Joe Spenner

anti taser

Wed Dec 26, 2007 17:10

http://disc.yourwebapps.com/discussion.cgi?disc=149495;article=116126;title=APFN

APFN:For documentation about abuse of a young mother and her child by Bush & Cheney, get a copy of one of the most mercyless abuse they suffered from stun guns. Be forewarned, it is not for the weak stomach types! The documentary it titled: "TRANCE FORMATION OF AMERICA, by Cathy O'Brien with Mark Phillips." (Available from internet. Start with: "CHAPTER 28, 'FREE TRADE OF DRUGS AND SLAVES AT THE JUAREZ BORDER." (In last sentence of first paragraph: "As soon as my eyes met his, I was knocked to the ground by a familiar blue-white blast (high-voltge) like the one I had recently experienced in D.C."(On page 205)."My world spun black. Someone had hit me with a powerfull stun gun and I was down." It is time to blow a steamboat whistle about such cowardly abuse! IT IS TIME TO BLOW A STEAMBOAT WHISTLE ABOUT COWARDLY TORTURE BY BUSH & CHENEY AND THEIR GANG OF CROOKS! FEARLESSLY, WITH DEPENDENCE ON GOD'S WISH FOR RESCUE OF INNOCENT, TORTURED PEOPLE! JOE SPENNER!

 

Link to comment
Share on other sites

Join the conversation

You are posting as a guest. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...