ear candles

[Guest guest]

I'm sending a web page that should cover all the

basics, just copy and paste. And after reading the

entire page my little secret is instead of using a

wooden dowel use a metal dowel. You'll have to either

grind and sand it yourself or take it to a metal shop.

Either way it should only be a few dollars to get

done. Also having two done at the same time speeds up

the process. The reason I prefer the metal it almost

takes no pressure to take off the candle from the

dowel. But the wood is a totally different story, you

may have success that way, but the wax did not want to

bond as hard on the metal. The wooden dowel, with the

amount of pressure it took to get the candles off,

ending up destroying most of the candles, not true

with the metal dowel.

Get a couple of drops of herbal oil like Eucalyptus

and put in the melting wax to give it that extra kick.

 

And for the Colloidal Silver I advise make it

yourself. A heck of a lot CHEAPER. Buy your wires on

ebay and your ppm tester there too. After you've made

the solution add too the colloidal(one pint) a couple

of drops of food grade H2O2(about four to eight drops

@ 35%proof) after doing so make sure you keep it out

of the sun and all lights. You'll have some powerful

stuff, we have even used it on boils with extreme

success.

Hope this helps got any more questions I'd be happy

to help. Just make sure you read up on all the above

for yourself before doing.

 

Good luck Corrine

 

 

 

 

 

 

http://www.greenleafpolitics.com/medicine_making_earcand_01.html