HEALING WITH SINGLE FREQUENCY LIGHT

[Guest guest]

HEALING WITH SINGLE FREQUENCY LIGHT by: Olszewski, David, E.E., I.E.

 

EARLY EXPERIMENTS In 1965, the Russians and Czechs were trying to standardize

colour therapy, which

is the use of colours to treat the body. When they used a single colour on a

number of people, they

got different reactions because colour affects emotions and produces different

effects. The Russians

wanted to have a standard treatment, so they theorized that if they isolated one

frequency of blue,

or red, they could duplicate colour therapy on a regulated basis. They started

separating different

frequencies with lasers, and they discovered a lot more than they expected to

find. They discovered

that a single frequency light in a laser can stimulate DNA in damaged cell

tissue. They used a low

power laser under 50-milliwatts because higher lasers can cut tissue.

 

PULSED VS.CONTINUOUS LASER They discovered that if they used a pulsed laser

light, the tissue healed

rapidly. On the other hand, if they gave a continuous beam, it sedated the cell

and killed the pain.

When a single frequency pulsed light hit the cell, it actually stimulated the

cell to start producing

more protein than it normally does, and as a result, the cell would heal. Even

when they took the

light away, the cell continued its healing. The continuous beam had a reverse

effect. It actually

caused the cell membrane to relax; it killed pain, reduced inflammation and made

muscle tissue relax.

 

INCREASED HEALING IN THE 660 nm WAVELENGTH It didn't matter what the frequency

was. It could be

infrared, red, blue, or green, as long as it was single although, as you move

toward the red end of

the spectrum, the rate of cellular regeneration increased. For instance, a

single frequency in the

green range might affect the kidney 40 times better than a normal base-line

study, whereas a red

would be about 4,000 times faster. So over the years they migrated to infrared,

red and eventually

the 660 nanometer wavelength because it was the fastest way to regenerate

tissue. So if you have an

injury you would normally recover from in ten days, you can actually recover

that tissue in two days

by treating it with light.

 

WAVELENGTH OF CELL TISSUE About ten years later at the University of Chicago,

researchers discovered

that the average wavelength of cell tissue in the human body ranged between 600

nanometers and 720

nm;

 

660 is the mid-point. So in essence, the reason a 660 nm works better than any

other single

frequency is because it is closer to the resonant frequency of cell tissue. The

other reason is that

660 nm absorbs better in hemoglobin.

 

LASER LIGHT VS LIGHT EMITTING DIODES (LED) When this therapy reached the U.S.

and Canada, both

lasers and light-emitting diodes at 660 nanometers were being used. The LED

diffuses; the single

frequency laser does not. With this diffusion, the cell can actually be in

control of the treatment

and shut off the molecules when it was done. But with the laser, the cells are

no longer in control;

the doctor or the practitioner applying the laser is in control. If he does it

too long or with too

much strength, you would not only heal the tissue, but you would start a

deterioration again. So

basically, the use of light-emitting diodes eliminated the draw back of lasers,

and light could be

applied into such sensitive areas as the eyes and around the face. LEDs allowed

this whole area to

blossom into a much larger usage by average people in their homes. Tiina Karu,

Ph.D. of the Laser

Technology Center in Russia, and affiliated with the University of California at

Berkely, probably

the top researcher in the world on the use of lasers and light emitting diodes

published a study in

Health and Physics Digest called " Photobiological Effects of Lasers " which

discusses photobiological

stimulation without laser light. The article explains that you can do laser

treatment without using

laser light, by using light emitting diodes which are much safer. Since the

cells are basically in

control of the process, there is no way to overuse light.

 

THE MERIDIAN SYSTEM Acupuncturists discovered that single frequency light could

activate acupressure

points. Pulse light could stimulate it; continuous light could sedate the

acupuncture points. But

they also discovered that light applied to a meridian end-point can actually be

traced flowing

through the meridian to the organ acupuncture points. The meridian system is a

useful pathway for

getting light deeper into the body, so if you are treating things like asthma in

the lungs, there is

an alternate method of getting light into the lungs.

 

DEPTH OF LIGHT PENETRATION As we developed more types of lights with different

geometrical shapes,

we were able to actually get light deeper into the body without going through

the meridians.

Initially, single frequency light penetrated approximately an inch and a half,

but today, larger

units can penetrate up to eight inches. It will go through the skull. We use it

on strokes,

concussions and internal problems in the brain. Excellent studies have been done

using light for pain

relief, degenerative osteoarthritis, carpal tunnel tendonitis, skin ailments,

acne, psoriasis,

healing of the sinus cells, throat and ear problems, whiplash and lower back

problems.

 

PENETRATING THROUGH THE BLOOD STREAM You can even get light into the blood

stream. One of the best

ways is through your belly button, because the aorta artery is behind the belly

button. So if you

insert the light there for 20 minutes, every drop of blood in the body will pass

in front of the

light, increasing the activity of your white cells, red cells, B-cells and

T-cells, so you can boost

your whole immune system.

 

Take care,

V

Join My Newsletter Today and Get a Free

Information Packed CD

http://www.health-freedom.info/

 

 

 

 

 

 

 

 

 

[Guest guest]

Where could I find a suitable machine? Further explanatory information?

 

Jonathan

 

V <vzon17 wrote:

HEALING WITH SINGLE FREQUENCY LIGHT by: Olszewski, David, E.E., I.E.

 

EARLY EXPERIMENTS In 1965, the Russians and Czechs were trying to standardize

colour therapy, which

is the use of colours to treat the body. When they used a single colour on a

number of people, they

got different reactions because colour affects emotions and produces different

effects. The Russians

wanted to have a standard treatment, so they theorized that if they isolated one

frequency of blue,

or red, they could duplicate colour therapy on a regulated basis. They started

separating different

frequencies with lasers, and they discovered a lot more than they expected to

find. They discovered

that a single frequency light in a laser can stimulate DNA in damaged cell

tissue. They used a low

power laser under 50-milliwatts because higher lasers can cut tissue.

 

PULSED VS.CONTINUOUS LASER They discovered that if they used a pulsed laser

light, the tissue healed

rapidly. On the other hand, if they gave a continuous beam, it sedated the cell

and killed the pain.

When a single frequency pulsed light hit the cell, it actually stimulated the

cell to start producing

more protein than it normally does, and as a result, the cell would heal. Even

when they took the

light away, the cell continued its healing. The continuous beam had a reverse

effect. It actually

caused the cell membrane to relax; it killed pain, reduced inflammation and made

muscle tissue relax.

 

INCREASED HEALING IN THE 660 nm WAVELENGTH It didn't matter what the frequency

was. It could be

infrared, red, blue, or green, as long as it was single although, as you move

toward the red end of

the spectrum, the rate of cellular regeneration increased. For instance, a

single frequency in the

green range might affect the kidney 40 times better than a normal base-line

study, whereas a red

would be about 4,000 times faster. So over the years they migrated to infrared,

red and eventually

the 660 nanometer wavelength because it was the fastest way to regenerate

tissue. So if you have an

injury you would normally recover from in ten days, you can actually recover

that tissue in two days

by treating it with light.

 

WAVELENGTH OF CELL TISSUE About ten years later at the University of Chicago,

researchers discovered

that the average wavelength of cell tissue in the human body ranged between 600

nanometers and 720

nm;

 

660 is the mid-point. So in essence, the reason a 660 nm works better than any

other single

frequency is because it is closer to the resonant frequency of cell tissue. The

other reason is that

660 nm absorbs better in hemoglobin.

 

LASER LIGHT VS LIGHT EMITTING DIODES (LED) When this therapy reached the U.S.

and Canada, both

lasers and light-emitting diodes at 660 nanometers were being used. The LED

diffuses; the single

frequency laser does not. With this diffusion, the cell can actually be in

control of the treatment

and shut off the molecules when it was done. But with the laser, the cells are

no longer in control;

the doctor or the practitioner applying the laser is in control. If he does it

too long or with too

much strength, you would not only heal the tissue, but you would start a

deterioration again. So

basically, the use of light-emitting diodes eliminated the draw back of lasers,

and light could be

applied into such sensitive areas as the eyes and around the face. LEDs allowed

this whole area to

blossom into a much larger usage by average people in their homes. Tiina Karu,

Ph.D. of the Laser

Technology Center in Russia, and affiliated with the University of California at

Berkely, probably

the top researcher in the world on the use of lasers and light emitting diodes

published a study in

Health and Physics Digest called " Photobiological Effects of Lasers " which

discusses photobiological

stimulation without laser light. The article explains that you can do laser

treatment without using

laser light, by using light emitting diodes which are much safer. Since the

cells are basically in

control of the process, there is no way to overuse light.

 

THE MERIDIAN SYSTEM Acupuncturists discovered that single frequency light could

activate acupressure

points. Pulse light could stimulate it; continuous light could sedate the

acupuncture points. But

they also discovered that light applied to a meridian end-point can actually be

traced flowing

through the meridian to the organ acupuncture points. The meridian system is a

useful pathway for

getting light deeper into the body, so if you are treating things like asthma in

the lungs, there is

an alternate method of getting light into the lungs.

 

DEPTH OF LIGHT PENETRATION As we developed more types of lights with different

geometrical shapes,

we were able to actually get light deeper into the body without going through

the meridians.

Initially, single frequency light penetrated approximately an inch and a half,

but today, larger

units can penetrate up to eight inches. It will go through the skull. We use it

on strokes,

concussions and internal problems in the brain. Excellent studies have been done

using light for pain

relief, degenerative osteoarthritis, carpal tunnel tendonitis, skin ailments,

acne, psoriasis,

healing of the sinus cells, throat and ear problems, whiplash and lower back

problems.

 

PENETRATING THROUGH THE BLOOD STREAM You can even get light into the blood

stream. One of the best

ways is through your belly button, because the aorta artery is behind the belly

button. So if you

insert the light there for 20 minutes, every drop of blood in the body will pass

in front of the

light, increasing the activity of your white cells, red cells, B-cells and

T-cells, so you can boost

your whole immune system.

 

Take care,

V

Join My Newsletter Today and Get a Free

Information Packed CD

http://www.health-freedom.info/

 

 

[Guest guest]

, jonathan

chamberlain <jonomark33 wrote:

>

> Where could I find a suitable machine?

 

Your best bet is to make one. I made one a few years ago with some LED

modules that had been recommended for this purpose on a .

 

http://alex.natel.net/misc/red_led_device.jpg

 

I wired them up for 12v and added a suitable limiting resistor. I

obtained the LED modules from http://www.digikey.com/ . The part

number was 67-1589-ND