Guest guest Posted October 15, 2001 Report Share Posted October 15, 2001 I have been making solid perfumes for years. Really, they are easier than you think. LOL The trick is to produce a finally product that is solid at room temperature but has an extremely low melt point so that it becomes liquid soon after wearing. They usually always need wax in them to firm them up so they don’t run. I make several that I put in my pentacle poison rings for sale. Basically you need a fat base (oils or butter fat), wax for thickener (you need a little paraffin, not just straight beeswax), and your perfume. It helps immensely to use a resinous agent also. Not only does it hold scent longer, but it gives you the correct consistency so much easier (although the resin process involved is longer). So, having said all that, here we go with a generic solid perfume recipe. Start with a half ounce of carrier oil or fat (or a blend of). Over heat; liquefy the fats and add about 1/8 ounce of your chosen resin (frankincense if you don’t want much smell from the resin, the frankincense will basically blend into the background and be pretty inconspicuous, copal for the lighter scents, dragon’s blood if you want that smell in it, amber works well in the golden form, but has a distinctive scent, red amber doesn’t work). Heat slowly and stir with something wooden or ceramic (no plastic or metal please) until it is nice and combined. Add your wax, add 1/8 ounce of paraffin and ½ ounce of beeswax to start. Melt and combine well. Remove from heat and begin stirring your arm off as it cools. After about a minute you will be able to see if it needs more wax (to thicken it). If it does, return to heat and add more wax. You may up the paraffin a little bit, but not too much. Again, remove from heat and stir until you think you cant stir anymore. When it gets to the stage where it is the consistency of petroleum jelly you add your eos. Have them blended before hand of course, because all you can do is shoot a dropper or so in there before it moves on to the next stage. Soon it will get to the stage where you can not stir. Instead use your spoon or stick to sort of need the ball of perfume. When it gets cool enough you will need to knead it with your fingers. Put some cornstarch on your hands before touching the ball!! Knead until nice and smooth. If the perfume is for sale or will be stored for a long time, you will probably want to knead in an extra couple of drops of your eo blend. Just make a little well, drop it in and close it up and roil around in the palm of your hand a while until it is blended. This last bit is sort of like a top scent, it is strong, but will wear off if the perfume is not closed up for a while. It is the scent you added while stirring that lasts. Store at room temp in a tin or airtight container. If you are loading it into a ring, it heat the ring a bit and put a few beads of beeswax in it first (same goes for tins etc, I imagine). Then press the perfume in. This helps it to stick in there, instead of just falling back out. I use wax seal stamps to put a design on the top of my perfumes when I am done. Just warm the stamp in hot tap water. It is a very nice touchJ I suggest you play with the formula without any scent for a while to get used to the pattern of it. You can always melt it down and add the eo to it, or more wax or fat or whatever. Always melt resin into oil or liquid fat first, before adding it to the re-melted perfume. Otherwise it can crystallize in the perfume and you will get chunks. This is also why you stir your arm off during the cooling, to avoid the crystals. You can omit the resin, but getting the correct ratio is much trickier. Blessings, Soseneda Quidquid Latine dictum sit, altum videtur. ICQ# 47264444 AIM: SosenedaA : Soseneda_Arianrhod Looking for herbs and other witchy supplies? Many wonderful handmade items from Twining Vines available at The Town Market TheTownMarket Quote Link to comment Share on other sites More sharing options...
Guest guest Posted October 15, 2001 Report Share Posted October 15, 2001 Thank you so much- I did check out Twining Vines, I am anxious to see it completed, but having built some web sites I know well it is a work in progress. ((Hugs)) Janet I have been making solid perfumes for years. Really, they are easier than you think. LOL The trick is to produce a finally product that is solid at room temperature but has an extremely low melt point so that it becomes liquid soon after wearing. They usually always need wax in them to firm them up so they don t run. I make several that I put in my pentacle poison rings for sale. Basically you need a fat base (oils or butter fat), wax for thickener (you need a little paraffin, not just straight beeswax), and your perfume. It helps immensely to use a resinous agent also. Not only does it hold scent longer, but it gives you the correct consistency so much easier (although the resin process involved is longer). So, having said all that, here we go with a generic solid perfume recipe. Start with a half ounce of carrier oil or fat (or a blend of). Over heat; liquefy the fats and add about 1/8 ounce of your chosen resin (frankincense if you don t want much smell from the resin, the frankincense will basically blend into the background and be pretty inconspicuous, copal for the lighter scents, dragon s blood if you want that smell in it, amber works well in the golden form, but has a distinctive scent, red amber doesn t work). Heat slowly and stir with something wooden or ceramic (no plastic or metal please) until it is nice and combined. Add your wax, add 1/8 ounce of paraffin and ½ ounce of beeswax to start. Melt and combine well. Remove from heat and begin stirring your arm off as it cools. After about a minute you will be able to see if it needs more wax (to thicken it). If it does, return to heat and add more wax. You may up the paraffin a little bit, but not too much. Again, remove from heat and stir until you think you cant stir anymore. When it gets to the stage where it is the consistency of petroleum jelly you add your eos. Have them blended before hand of course, because all you can do is shoot a dropper or so in there before it moves on to the next stage. Soon it will get to the stage where you can not stir. Instead use your spoon or stick to sort of need the ball of perfume. When it gets cool enough you will need to knead it with your fingers. Put some cornstarch on your hands before touching the ball!! Knead until nice and smooth. If the perfume is for sale or will be stored for a long time, you will probably want to knead in an extra couple of drops of your eo blend. Just make a little well, drop it in and close it up and roil around in the palm of your hand a while until it is blended. This last bit is sort of like a top scent, it is strong, but will wear off if the perfume is not closed up for a while. It is the scent you added while stirring that lasts. Store at room temp in a tin or airtight container. If you are loading it into a ring, it heat the ring a bit and put a few beads of beeswax in it first (same goes for tins etc, I imagine). Then press the perfume in. This helps it to stick in there, instead of just falling back out. I use wax seal stamps to put a design on the top of my perfumes when I am done. Just warm the stamp in hot tap water. It is a very nice touchJ I suggest you play with the formula without any scent for a while to get used to the pattern of it. You can always melt it down and add the eo to it, or more wax or fat or whatever. Always melt resin into oil or liquid fat first, before adding it to the re-melted perfume. Otherwise it can crystallize in the perfume and you will get chunks. This is also why you stir your arm off during the cooling, to avoid the crystals. You can omit the resin, but getting the correct ratio is much trickier. Blessings, Soseneda Quidquid Latine dictum sit, altum videtur. ICQ# 47264444 AIM: SosenedaA : Soseneda_Arianrhod Looking for herbs and other witchy supplies? Many wonderful handmade items from Twining Vines available at The Town Market TheTownMarket Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You are posting as a guest. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.