Guest guest Posted October 26, 2005 Report Share Posted October 26, 2005 Hi Friends, Recently I purchased 2,3,4,5,7 and 8 mukhi rudrksha beads from http://www.rudraksha-ratna.com . I planning to put them in a thread and wear it. Can I make a hole?. What is the best way to make hole. Please guide me. Thanks Shivaram Quote Link to comment Share on other sites More sharing options...
Guest guest Posted October 26, 2005 Report Share Posted October 26, 2005 Dear ShivaRam Ji Namaskar and thank you for your message.....easiest way to open the Rudraksha Beads for stringing is to use a needle and be careful only to remove the pithy material in the hole...........most of the time the pithy material only covers the hole on top and bottom of bead and the inside chamber is open with only a spindle of pithy mateial running through the center..........start in center of closed hole and slowly work needle from side to side.....this should start the pithy material to move........from there you simply continue to rotate the needle around slowly and carefully......... as you press the needle carefully on the center of the pithy material in the hole and the hole will open up.........do same on other side and you can string hope this helps Wishing you and Family the Best DD In a message dated 10/26/2005 3:41:28 PM Pacific Standard Time, shivaramsiddappa writes: > > > > Hi Friends, > > > > Recently I purchased 2,3,4,5,7 and 8 mukhi rudrksha beads from > http://www.rudraksha-ratna.com . I planning to put them in a thread and wear it. Can I > make a hole?. What is the best way to make hole. Please guide me. > > Thanks > > Shivaram > > > > To send an email to: > > > > Links > > > > > > > Quote Link to comment Share on other sites More sharing options...
Guest guest Posted October 26, 2005 Report Share Posted October 26, 2005 Namaskar Is it necessary to energize the Rudraksha beads b4 wearing it. Awaiting reply Urgently Sandeep --- AumShiningLotus wrote: Dear ShivaRam Ji Namaskar and thank you for your message.....easiest way to open the Rudraksha Beads for stringing is to use a needle and be careful only to remove the pithy material in the hole...........most of the time the pithy material only covers the hole on top and bottom of bead and the inside chamber is open with only a spindle of pithy mateial running through the center..........start in center of closed hole and slowly work needle from side to side.....this should start the pithy material to move........from there you simply continue to rotate the needle around slowly and carefully......... as you press the needle carefully on the center of the pithy material in the hole and the hole will open up.........do same on other side and you can string hope this helps Wishing you and Family the Best DD In a message dated 10/26/2005 3:41:28 PM Pacific Standard Time, shivaramsiddappa writes: > > > > Hi Friends, > > > > Recently I purchased 2,3,4,5,7 and 8 mukhi rudrksha beads from > http://www.rudraksha-ratna.com . I planning to put them in a thread and wear it. Can I > make a hole?. What is the best way to make hole. Please guide me. > > Thanks > > Shivaram > > > > [Non-text portions of this message have been removed] To send an email to: > > > > Links > > > > > > > To send an email to: Visit your group "" on the web. Terms of Service. ________ India Matrimony: Find your partner now. Go to http://.shaadi.com Quote Link to comment Share on other sites More sharing options...
Guest guest Posted October 27, 2005 Report Share Posted October 27, 2005 Dear Sandeep Ji Namaskar and thank you for your message...........The Holy Books say to wear with or without Mantra..............meaning the Tears of Lord Siva already are energised as they are grown from the tree..........however Rudra Center Blesses and Energises the Holy Beads in Hindu Temple in Mumbai India at clients request as an additional Traditional Service to our many Clients hope this helps to explain Wishing you and Family the Best Rudra Center America DharmaDev Arya In a message dated 10/27/2005 8:43:04 AM Pacific Standard Time, sandeepidbi writes: > > > Namaskar > > Is it necessary to energize the Rudraksha beads b4 > wearing it. > > > Awaiting reply Urgently > > > Sandeep > --- AumShiningLotus wrote: > > > > Dear ShivaRam Ji > > Namaskar and thank you for your message.....easiest > way to open the Rudraksha > Beads for stringing is to use a needle and be careful > only to remove the > pithy material in the hole...........most of the time > the pithy material only > Quote Link to comment Share on other sites More sharing options...
Guest guest Posted October 27, 2005 Report Share Posted October 27, 2005 Dear ShivaRam Ji The Gauri Shankar Rudraksha is opened in the same manner however as we know there are two beads together and depending on how you wish to string this Holy Rudraksha you may wish to open only one Bead........Our Rudra Center Artisans in India have the expertise and makeing equipment to open both holes and then pendal this Rudraksha with metal caps so that it hangs evenly when pendaled from the bottom or top of a mala........you can see pictures of these on our website www.rudraksha-ratna.com If you had two of the Gauri Shankar you could open one bead on each and then string them by faceing them together in line on the mala like any other Bead......... in a pair with mouth parts to mouth parts.........usually one bead in a Gauri Shankar is a little smaller than the other.............so you need to match a pair of beads up so the same size bead on each Gauri Shankar is opened so it is a balanced look Other option is to leave the Gauri Shankar closed and keep at place of worship as Puranas regard Gauri Shankar as the Best for Happy Family Life hope this helps a little Wishing you and Family the Best DD In a message dated 10/27/2005 8:58:43 AM Pacific Standard Time, shivaramsiddappa writes: > > > Dear DD Ji > > Thank you for you prompt reply. What about Gauri Shanar Rudrksha?. I did > purchased that too. > Thanks > Shivaram > Quote Link to comment Share on other sites More sharing options...
Guest guest Posted October 27, 2005 Report Share Posted October 27, 2005 Dear DD Ji Thank you for you prompt reply. What about Gauri Shanar Rudrksha?. I did purchased that too. Thanks Shivaram AumShiningLotus wrote: Dear ShivaRam Ji Namaskar and thank you for your message.....easiest way to open the Rudraksha Beads for stringing is to use a needle and be careful only to remove the pithy material in the hole...........most of the time the pithy material only covers the hole on top and bottom of bead and the inside chamber is open with only a spindle of pithy mateial running through the center..........start in center of closed hole and slowly work needle from side to side.....this should start the pithy material to move........from there you simply continue to rotate the needle around slowly and carefully......... as you press the needle carefully on the center of the pithy material in the hole and the hole will open up.........do same on other side and you can string hope this helps Wishing you and Family the Best DD In a message dated 10/26/2005 3:41:28 PM Pacific Standard Time, shivaramsiddappa writes: > > > > Hi Friends, > > > > Recently I purchased 2,3,4,5,7 and 8 mukhi rudrksha beads from > http://www.rudraksha-ratna.com . I planning to put them in a thread and wear it. Can I > make a hole?. What is the best way to make hole. Please guide me. > > Thanks > > Shivaram > > > > To send an email to: > > > > Links > > > > > > > To send an email to: Visit your group "" on the web. Quote Link to comment Share on other sites More sharing options...
Guest guest Posted October 30, 2005 Report Share Posted October 30, 2005 Namaste DharmDevji Thanks for yr reply. I hav purchased 7 mukhi 8 mukhi Ganesh rudraksha and 10 mukhi Rudrakshas and wearing after it was done rudraabhsidhek by Pujari in Omkareshwar temple Borivli East Mumbai Sandeep Ubhaykar --- AumShiningLotus wrote: Dear Sandeep Ji Namaskar and thank you for your message...........The Holy Books say to wear with or without Mantra..............meaning the Tears of Lord Siva already are energised as they are grown from the tree..........however Rudra Center Blesses and Energises the Holy Beads in Hindu Temple in Mumbai India at clients request as an additional Traditional Service to our many Clients hope this helps to explain Wishing you and Family the Best Rudra Center America DharmaDev Arya In a message dated 10/27/2005 8:43:04 AM Pacific Standard Time, sandeepidbi writes: > > > Namaskar > > Is it necessary to energize the Rudraksha beads b4 > wearing it. > > > Awaiting reply Urgently > > > Sandeep > --- AumShiningLotus wrote: > > > > Dear ShivaRam Ji > > Namaskar and thank you for your message.....easiest > way to open the Rudraksha > Beads for stringing is to use a needle and be careful > only to remove the > pithy material in the hole...........most of the time > the pithy material only > To send an email to: Visit your group "" on the web. Terms of Service. ________ Enjoy this Diwali with Y! India Click here http://in.promos./fabmall/index.html Quote Link to comment Share on other sites More sharing options...
Guest guest Posted October 31, 2005 Report Share Posted October 31, 2005 Dear ShivaRam Ji Namaskar and thanking you for your reply...............yes you can use silver or gold beads or Sphatik Crystal Beads between the Holy Rudraksha.........best item I have found is red wool felt actually........you will see this on many of the Kanthas and it can be bought from a cloth store in your area...............is easy to cut circles out of this cloth to match size of beads and the wool transfers the electromagnetic energy of the Rudraksha so you have a complete circuit hope this helps Wishing you and Family the Best In a message dated 10/31/2005 9:29:51 AM Pacific Standard Time, shivaramsiddappa writes: > Subj: RBSC : Rudrksha Beads > 10/31/2005 9:29:51 AM Pacific Standard Time > shivaramsiddappa > Reply-to: > > Sent from the Internet > > > > > Hi DD Ji > > > > I planning to put all the individual rudraksha beads I purchased in a red > thread. I found some design that looks in between beads. That support rudraksh > beads touching each other. Can I add these in between rudraksha beads?. > Please advice me. > > Thanks > > Shivaram > > > > > To send an email to: > > > > Links > > > > > > > > Quote Link to comment Share on other sites More sharing options...
Guest guest Posted October 31, 2005 Report Share Posted October 31, 2005 Dear Sandeep Ji Namaskar and thank you for your reply.........this is perfect..........Wishing you and Family the Best Rudra Center America DD In a message dated 10/31/2005 9:29:25 AM Pacific Standard Time, sandeepidbi writes: > > > Namaste DharmDevji > > Thanks for yr reply. > > I hav purchased 7 mukhi 8 mukhi Ganesh rudraksha and > 10 mukhi Rudrakshas and wearing after it was done > rudraabhsidhek by Pujari in Omkareshwar temple Borivli > East Mumbai > > Sandeep Ubhaykar > --- AumShiningLotus wrote: > > > > Dear Sandeep Ji > > Namaskar and thank you for your message...........The > Holy Books say to wear > with or without Mantra..............meaning the Tears > of Lord Siva already are > energised as they are grown from the > tree..........however Rudra Center > Blesses and Energises the Holy Beads in Hindu Temple > in Mumbai India at clients > request as an additional Traditional Service to our > many Clients > > hope this helps to explain > > Wishing you and Family the Best > > Rudra Center America > > DharmaDev Arya > > > > In a message dated 10/27/2005 8:43:04 AM Pacific > Standard Time, > sandeepidbi writes: > > > > > > >Namaskar > > > >Is it necessary to energize the Rudraksha beads b4 > >wearing it. > > > > > >Awaiting reply Urgently > > > > > >Sandeep > >--- AumShiningLotus wrote: > > > > > > > >Dear ShivaRam Ji > > > >Namaskar and thank you for your message.....easiest > >way to open the Rudraksha > >Beads for stringing is to use a needle and be > careful > >only to remove the > >pithy material in the hole...........most of the > time > >the pithy material only > > > Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You are posting as a guest. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.